Bestwinterproducts.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Measure Cross-Country Ski Pole Length?

Prime for Young Adults: check your eligibility on Amazon

There’s no need to guess or measure to the top of the handle. Measure from the bottom of the pole tip to where the strap attaches to the grip, the handle you hold. That gives you the pole’s length using the usual measuring points.

The right length also depends on whether you ski in parallel tracks or use a side-to-side skating push. If you’re choosing poles by your height, use the sizing chart for your technique, since makers may set their size ranges a little differently. If you already have poles, a standing fit check can help you see whether they feel like a sensible match. Here’s how to measure and compare your options.

Where to Start and Stop the Measurement

Measure a cross-country ski pole from the bottom of its tip to the point where the strap attaches to the grip. The grip is the handle you hold, and the strap is the loop your hand goes through. The strap attachment point, rather than the top of the grip, is the usual endpoint for measuring pole length.

The top of the grip can be misleading because grips differ in shape and height. If you measure to the very top, you may record a longer number than a sizing chart expects. The tip can also have a sharp or pointed end, so take care when handling the pole and keep it pointed away from your body.

There is one detail to confirm: some pole makers may define the endpoint differently on their sizing charts. If a chart or product page gives a measurement method, follow that method. This matters when you compare a pole you own with a size listed by a maker, because two different measuring points can make the numbers look inconsistent.

Keep the pole straight while you measure it. A tape measure placed along the pole gives a more useful reading than measuring a slanted line from the floor to the grip. If the pole has a removable basket near the tip, measure from the bottom of the tip, not from the basket.

How to Measure a Pole You Already Own

Use a tape measure and set the pole on a flat surface. Keep the tip away from your hands and face while you position it. Follow these steps:

  1. Find the bottom of the tip. This is the point at the end of the pole that touches the snow. Do not start at the basket, the wider piece above the tip.
  2. Find the strap attachment point. Look at the grip for the place where the pole strap connects. Do not use the top of the grip unless the maker's instructions specifically say to measure there.
  3. Line up the tape measure. Place it beside the pole, running from the bottom of the tip to the strap attachment point. Keep the tape close to the pole instead of stretching it diagonally.
  4. Read and record the length. Write down the measurement and note which points you used. That way, you can compare it fairly with another pole or a maker's chart.

If the pole is too long to lie flat, stand it upright with the tip on a level floor. Hold the tape beside the pole and keep it straight. Ask someone to read the measurement if the tape slips or you cannot see the marks clearly.

Do not measure from the snow basket, since it sits above the tip and can add extra length to your reading. Also avoid measuring to the top of the grip just because it is the easiest part to see. Those two shortcuts can make a pole seem longer than it is by the measurement method used on a sizing chart.

If your pole has an adjustable length, check that it is locked before measuring. A loose section can slide while you hold the tape, giving you a reading that does not match the pole's set length. If you are comparing the pole with a chart, use the maker's stated measurement points whenever they are available.

Use Your Height and Skiing Style to Choose a Size

If you do not have a pole to measure, start with your height and the sizing chart from the pole maker. Find your height in the chart, then look for a separate recommendation for classic skiing or skate skiing. Do not assume that one chart applies to both styles.

  • Check the technique. Classic skiing means moving your skis in parallel tracks. Skate skiing uses a side-to-side push, much like skating.
  • Find your height. Use the height unit shown on the chart, and check whether the maker asks you to use a particular measuring method.
  • Read the correct style column. Choose classic or skate, based on how you plan to ski. If you do both, compare the recommendations rather than treating them as the same.
  • Check the pole measurement rule. Confirm whether the chart measures to the strap attachment point or uses another endpoint.

Classic and skate poles are usually sized differently because the two techniques use the poles in different ways. A pole chosen for classic skiing may feel short when you try to use it for skate skiing, while a longer skate pole may feel awkward for classic skiing. The maker's chart is the best place to confirm the recommended length for your height and technique.

Charts can differ from one maker to another, so do not rely on a sizing rule you found for a different pole. If you are shopping for poles, check the product page or ask the maker which measurement points its chart uses. If the chart is unclear, contact the seller or maker before choosing a size rather than guessing from the pole's listed length alone.

Check the Fit While Standing, and Handle In-Between Sizes

A standing check can help you spot a pole that seems clearly too long or too short, but it should not replace the maker's chart. Stand upright on a flat surface in your ski boots, if you have them, and hold the pole by its grip. Keep your shoulders relaxed rather than lifting them to reach the grip.

Notice whether your arm and shoulder feel comfortable when you hold the pole. If you have to raise a shoulder or stretch to keep hold of it, the pole may be too long for you. If the pole feels unusually short in your hand, compare its measured length with the chart for your height and style before deciding.

For a more useful comparison, hold a pole that matches the maker's recommended length beside you. Make sure both poles are measured from the same points. A standing check is only a rough guide because arm length, posture, boots and personal comfort can affect how the pole feels.

If your height falls between chart entries, read the maker's guidance for both nearby sizes. Check whether the chart gives a range or tells you how to choose when you are between sizes. If it does not, ask the maker or seller which size better fits your technique and the way the chart defines pole length.

Do not automatically choose the longer pole because it seems like the safer option. A pole that is too long can be awkward to plant, and one that is too short may not feel comfortable to push with. If you are choosing one pair for both classic and skate skiing, ask the maker for guidance; the two styles may call for different lengths, so one size may not be the best fit for both.

When you compare a pole in a shop with a chart online, confirm that both use the same endpoint. If the listed length and your tape measure do not match, first check whether one measurement ends at the strap attachment point and the other ends at the top of the grip. That small difference in method can explain an apparent mismatch without meaning the pole itself is faulty.

You do not need a ski professional to take this measurement. If the pole is damaged, its sections do not stay in place, or the tip is loose, stop using it and ask the seller or maker for help before skiing with it. A pole that changes length or loses its tip can be difficult to control on snow.

FAQs

Do I measure from the pole tip or the basket?

Start at the bottom of the pole tip, the point that touches the snow. Do not start at the basket, which sits above the tip. Keep the tape beside the pole so it follows the pole's length.

Should I measure my height or the pole?

Use your height to find a recommended size on the pole maker's chart. Measure an existing pole from the bottom of the tip to the maker's stated endpoint, usually where the strap attaches to the grip. The two measurements serve different purposes, so compare them using the maker's chart and measurement method.

What if the chart does not say where to measure?

Ask the pole maker or seller to confirm its measurement points before choosing a size. Do not assume the chart ends at the top of the grip, since another chart may use the strap attachment point. Use the same method for any pole you compare with the chart.

Related guides: how to choose cross country ski pole length and how to determine cross country ski pole length.

4.3
3 ratings
Leonard Lewis
WRITTEN BY
Leonard Lewis
Leonard is a male editor with over 20 years of experience in the field of automotive journalism. Based in Detroit, he is well-known for his in-depth car reviews and guides. He is also a regular contributor to several high-profile auto shows around the world.