What Size Poles Do You Need for Cross-Country Skiing?
Cross-country ski poles should match your height and the way you ski. The right length depends on whether you use a classic or skate style, so one size won’t suit everyone.
Start with the pole maker’s sizing chart, then check the fit while wearing your ski boots. Makers may measure poles from the tip or from the handle, and comfort can matter if you’re between sizes or still learning. Poles that feel too long or too short can make each push awkward and tire your arms, so here’s how to measure and check the fit.
How to size cross-country ski poles
Pole length isn’t determined by height alone. Your skiing style matters because classic and skate skiing use different movements, and the right pole length helps you push without hunching, reaching awkwardly, or tiring your arms sooner than necessary.
A pole maker’s sizing chart is the best place to start. Charts can differ, so don’t assume one brand’s size will match another brand’s. Your boots matter, too: the height of your ski boots changes your standing position, and makers may measure a pole from its tip or from the handle.
Check your pole size in these steps
- Choose your skiing style first. Find out whether you’ll mainly ski classic or skate style. The two styles use different pole lengths, so choosing a size before choosing a style can lead to poles that feel awkward on the trail.
- Look up your height on the pole maker’s chart. Use the chart for the exact pole you’re considering, and follow its instructions for your style. Don’t substitute a chart from a different maker, since sizing guidance and how pole length is measured can vary.
- Put on the boots you’ll ski in. Stand upright on a level floor in your ski boots. This gives you a more useful fit check than measuring in socks or everyday shoes, which may leave you standing at a different height.
- Check how the maker measures the pole. A listed length may run from the tip to the top of the handle, or the maker may give a different measuring point. Read the sizing notes so you compare the chart with the same part of the pole.
- Hold the pole the way the maker directs. Keep your body relaxed and your shoulders level. Check where the handle reaches and whether your arm bends comfortably, rather than reaching up or pressing down to hold it.
- Repeat the check for the other skiing style if needed. Use that style’s chart guidance, not the size you selected for the first style. This shows whether one pair is a sensible compromise or whether the two styles call for noticeably different lengths.
- Ask the maker if the chart and your fit disagree. Share your height, skiing style, boot setup, and the pole length you’re considering. This is especially useful if you’re between sizes or can’t tell whether the maker measures from the tip or handle.
A comfortable fit should let you hold the poles without lifting your shoulders, leaning forward, or locking your elbows. If you’re only checking a pole in a shop, keep your boots on and follow the maker’s stated hand position. A pole that seems comfortable while you’re standing still may still feel wrong if you’ve checked it without accounting for your style or the maker’s measurement method.
Classic and skate poles aren’t usually the same length
Classic skiing uses a striding motion, with your skis moving mostly forward in tracks. Skate skiing uses a side-to-side push, a bit like skating. Because the arm movements differ, the two styles generally call for different pole lengths.
Skate poles are usually longer than classic poles. A longer pole can suit the more upright pushing motion used in skate skiing, while a shorter pole can feel easier to place and push with during classic strides. Use the maker’s chart for each style rather than relying on a general rule alone.
If you mainly ski classic, choose your size from the classic guidance. If you mainly skate, use the skate guidance. A pole chosen for one style may feel too long or short when you switch, even if you’re the same height.
The handle’s position is a useful check, but it isn’t a substitute for the right chart. Makers may show a body landmark or a specific way to hold the pole. Follow that guidance exactly, since comparing your grip with a different maker’s reference can give you a misleading answer.
If you’re between sizes or want one pair
- Between sizes? First confirm that you used the chart for your height, style, and exact pole. Then follow the maker’s advice about choosing between the listed lengths. Don’t automatically size up or down based only on what feels familiar while standing.
- Want one pair for both styles? Compare the chart recommendations for classic and skate skiing. If they differ, one fixed-length pair will be a compromise, not an exact match for both. Choose based on the style you ski most, and ask the maker whether an adjustable pole is intended for both styles.
- New to skiing or skiing occasionally? Prioritize relaxed posture and an easy, natural reach. A length that makes you shrug or stretch with every push can spoil your rhythm, especially when you’re still learning how to coordinate your arms and legs.
- Still unsure after checking? Contact the maker or ask a ski shop to compare your height and boots with the chart. Bring the pole’s exact size information, because two poles with the same general label may not use the same measuring points.
Common sizing mistakes to avoid
- Using height alone. Your height is the starting point, but it doesn’t tell you whether you’re choosing a classic or skate pole. Check the style-specific chart before buying.
- Using a chart from another brand. Sizing advice and pole measurements can vary. Use the maker’s own chart for the pole you plan to buy.
- Checking in the wrong footwear. Everyday shoes or bare feet don’t match your skiing stance. Wear your ski boots for the standing fit check.
- Comparing different measuring points. Don’t compare a tip-to-handle pole length with guidance that measures from another point. Confirm how the maker defines the listed length.
- Choosing only by how the pole looks. A pole can seem like a reasonable length in your hand but still make you lift your shoulders or reach too far. Check your posture and arm position against the maker’s guidance.
Confirm sizing with the pole maker when its chart is unclear, when your body height falls between listed sizes, or when the handle position doesn’t match the maker’s instructions. Ask before buying if the pole’s measurement method isn’t stated. A quick answer from the maker can help you avoid choosing a length that makes each push feel like extra work.
FAQs
How do I measure myself for cross-country ski poles?
Start with your height and the chart from the pole maker, using the guidance for your skiing style. Then stand in your ski boots and hold the pole as the maker directs. Check that your shoulders stay relaxed and your arm doesn’t have to reach or press uncomfortably.
Where should the handle reach when I hold the pole?
Use the body position or hand placement shown in the maker’s sizing instructions. There isn’t one handle position that applies to every pole, because the maker’s measuring method and the style you ski can change the reference. If the chart doesn’t explain the grip, ask the maker before settling on a size.
Can I use one pair for classic and skate skiing?
You can use one pair, but it may not be the ideal length for both styles. Compare the maker’s size guidance for classic and skate skiing, then choose based on the style you do most. Ask whether an adjustable pair is suitable for both before buying.
What if my height falls between two sizes?
Check that you’re using the correct chart for your style and that you understand how the pole is measured. Follow the maker’s advice for choosing between sizes rather than guessing from height alone. If you still can’t decide, contact the maker with your height, boots, and skiing style.
Related guides: what size cross country ski poles do i need and what size poles for cross country skiing.





















