How to Remove Leki Ski Pole Grips Without Damage
There’s no need to worry if the grip won’t move right away. The safest way to remove it is to identify how it’s attached and follow the instructions for that exact pole model, rather than pulling or twisting harder. Leki grips may be held on in different ways, so one removal method won’t suit every pole.
Before you start, look for a visible screw or release and check the pole’s instructions. The correct steps can also depend on whether you want to save the grip or replace it. Don’t cut it or apply uncontrolled heat, since that can damage the grip or the long pole underneath. Start by checking what you can see and what the model instructions say.
Confirm how your exact Leki grip is attached before you pull
Leki ski pole grips don’t all come off the same way. The right removal method depends on the pole and grip model, and a method that works on one pole could crack another grip or damage the long pole under it.
Start with the pole’s model name or number, if you can find it. Look near the basket, on the pole, or on any paperwork or packaging you still have. Then check the instructions for that exact model or contact Leki and ask how its grip is held on and how it should be removed.
A grip can look like it simply slides over the pole, but its attachment may not be visible from the outside. Don’t assume that a tight grip is only stuck with glue, or that twisting harder will release it. Get the model-specific method before applying heat, using a tool, or pulling.
If you’re replacing the grip, say so when you ask Leki. If you want to keep the grip, say that too. The safe approach may depend on whether the grip needs to stay intact.
Inspect the grip and pole without forcing anything
Before you try to remove a part, set the pole down somewhere stable and look closely at the grip, its lower edge, and the top of the long pole beneath it. Good light helps you spot a release or damage without poking around blindly.
- Look for a visible screw or release. Check around the grip’s base and sides. Don’t turn a screw or press a release unless the instructions identify it as part of the removal process.
- Look for a seam or cap. Note any cover, plug, or separate piece, but don’t pry it off just because it looks removable.
- Check for damage. Look for cracks, splits, a bent pole, or a loose area where the grip meets the pole. A damaged part may need a repair shop rather than more force.
- Note the pole and grip details. Write down the model information you found and describe what you can see. A clear description can help Leki identify the correct instructions.
- Decide whether you’re saving the grip. A grip you plan to reuse needs extra care. If it’s already cracked or being replaced, tell the repair shop, but don’t cut it off unless the model-specific directions say to do so.
Don’t put pliers, a knife, or a screwdriver between the grip and the pole to search for an attachment. That can scratch or gouge the pole, split the grip, or damage a part you can’t see.
Follow the confirmed removal method in order
Use these steps after you have instructions for the exact pole and grip. They help you avoid rushing, but they are not a universal removal method. If Leki’s directions differ, follow those directions.
- Gather the parts and instructions. Keep the directions nearby and use only the tools or supplies they call for. Don’t substitute a sharper tool or a stronger heat source because the grip hasn’t moved yet.
- Secure the pole gently. Rest it on a flat surface or hold it steady without crushing the grip or bending the pole. Keep the grip clear of a table edge so you can see the attachment as you work.
- Remove or release only the part named in the instructions. If the directions identify a screw, cap, or release, deal with that part in the stated order. If you can’t identify the part, stop and ask Leki rather than guessing.
- Use the stated grip movement. The instructions may describe a particular way to loosen or lift the grip. Follow that movement gently and keep the pole steady. Don’t add a hard twist, pry, or sudden pull if the grip resists.
- Pause if the grip doesn’t move as described. Check that you followed each step and that you have the correct instructions for the model. A grip that won’t budge is a reason to verify the method, not a reason to increase force.
- Inspect the exposed pole and grip once they separate. Look for cracks, scratches, or loose pieces. If you see damage or aren’t sure whether anything has broken off, don’t fit a replacement yet. Ask Leki or a ski repair shop what to do next.
Move slowly enough to notice what is happening. For example, if the grip starts to split while you work, stop at once. Continuing may make a repair harder and could leave the pole unsuitable for a secure replacement.
Don’t force, cut, or heat the grip on your own
- Don’t yank or twist hard. A stubborn grip may be held by an attachment you can’t see. Force can damage the grip or the pole beneath it.
- Don’t pry with a blade or metal tool. A blade can cut your hand or the grip. A hard edge can also scratch or gouge the pole.
- Don’t cut off a grip without model-specific directions. The pole may be damaged during the cut, especially if you can’t tell where the grip ends and the pole begins.
- Don’t apply uncontrolled heat. A flame or a hot tool can damage the grip or pole. Even a less direct heat source should only be used if the instructions for that model say to use it and explain how.
- Don’t assume glue is the only thing holding it. A grip that feels stuck doesn’t tell you what kind of attachment it uses. Pulling as if it were held by glue alone can cause damage.
- Don’t install a new grip over a damaged or uncertain pole end. If the pole is scratched, cracked, bent, or has a loose piece, get advice before fitting a replacement. A grip that doesn’t sit securely may come loose.
If you already started and the grip is still in place, stop before trying a different tool or heating method. Set the pole aside and confirm the correct removal instructions first.
Get help if the grip still won’t come off
Stop and contact Leki or a ski repair shop if you can’t confirm the model, can’t identify the attachment, or the grip resists the method in the instructions. Also stop if the grip cracks, the pole bends, or you notice damage while working.
When you ask for help, share the pole’s model information and say whether you’re trying to save the grip. Describe any visible screw, release, seam, or damage. If you can’t find the model details, explain that rather than guessing; a repair shop may be able to look at the pole and advise you in person.
Don’t keep pulling while you wait for an answer. Leaving the grip in place is safer than damaging the pole or making the replacement fit uncertain.
FAQs
How can I tell how my Leki grip is attached?
Check the model information on the pole and look for instructions for that exact model. You can note visible features such as a screw, release, or seam, but those alone may not show how the grip comes off. Ask Leki if the attachment or removal method isn’t clear.
What should I remove or release first?
Remove or release only the part that the instructions for your model name. Don’t take off a cap, turn a screw, or press a release based only on how it looks. If the directions don’t clearly identify the first step, pause and contact Leki or a ski repair shop.
Can I warm the grip to loosen it?
Only use heat if the instructions for your exact pole and grip say to do so and explain how. Uncontrolled heat can damage the grip or pole, and a flame or hot tool is not a safe shortcut. If you can’t confirm that heat is allowed, don’t use it.
What if I’m replacing the grip and don’t need to save it?
Tell Leki or the repair shop that the grip will be replaced, but still ask for the correct removal method. A grip that won’t be reused can still be attached in a way that makes cutting or pulling risky for the pole. Wait for model-specific directions before removing it.
Related guides: how to remove ski pole grips and how to remove ski pole handles.





















