Bestwinterproducts.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to Remove Ski Pole Grips Without Forcing Them

Prime for Young Adults: check your eligibility on Amazon

Many people assume a ski pole grip simply pulls off, but that can damage the grip or the pole. Most grips are held on with glue, so soften the bond only if the maker allows it, then gently twist and pull.

The right approach depends on how the grip is attached, what the pole is made of, and whether you hope to use the grip again. Check the maker’s instructions before warming anything, since heat can harm some poles or finishes. If the grip won’t move without force, stop rather than risk a crack or a tool slipping into your hand. Start by checking the attachment and gathering a few simple tools.

Identify How the Grip Is Attached Before You Pull

Look closely at the top and sides of the grip before trying to remove it. Some grips are held by glue, while others may have a screw, pin, or another part you can see. A visible fastener can mean the grip is meant to come off in a different way, so do not start twisting until you know what you are dealing with.

Check the pole maker’s instructions for grip removal, especially if you know the pole’s make and model. Instructions matter because poles and grips can be made from different materials, and heat or force that one design can handle may harm another. If the instructions say the grip is not meant to be removed, or do not explain how to remove it, ask the maker or a ski shop before going further.

If you see no screw or pin, the grip may be glued to the long pole section, also called the shaft. A grip that turns slightly but does not slide may still have glue holding it in place. Do not assume that a tight grip will come off if you pull harder.

Steps to Remove a Ski Pole Grip Carefully

  1. Check the maker’s instructions first. Find guidance for your exact pole if possible, and note whether the grip can be removed, whether heat is allowed, and what method the maker advises. If you cannot confirm that heat is safe, do not use it.
  2. Look for a fastener or a seam. Examine the grip where it meets the pole and around its top and sides. If you find a screw, pin, or other fitting, follow the maker’s directions for that part rather than treating the grip as glued on.
  3. Gather simple supplies. Set out a soft cloth, a way to hold the pole without crushing it, and a blunt, flexible plastic tool only if the maker’s directions call for one. Keep sharp knives, metal screwdrivers, and other sharp or hard tools away from the pole and your hands.
  4. Protect the pole and your work area. Lay the pole on a steady surface with the grip easy to reach. Wrap a soft cloth around the pole where it rests, and keep the grip clear so you can hold it without squeezing or scraping the pole.
  5. Try a gentle twist before pulling. Hold the pole firmly without bending it, then turn the grip a little from side to side. If it moves easily, keep the movement small and try to draw the grip straight off while turning it gently.
  6. Stop if the grip does not move with light effort. A grip that stays fixed may be held by strong glue, a hidden fastener, or a design that needs a different removal method. Do not jerk it, lean on it, or clamp the pole tightly to force movement.
  7. Use warmth only when the maker allows it. If the instructions permit warming the grip, follow their method and keep the heat mild and controlled. Warm the grip gradually, then try a gentle twist again; stop if the pole or grip changes shape, feels unusually hot, or shows damage.
  8. Ease the grip off without levering against the pole. If the grip begins to move, keep turning and pulling it straight along the pole. If the maker permits a blunt plastic tool, use it gently at the edge of the grip; do not use the pole as a point to push against.
  9. Check the pole as soon as the grip comes free. Look for cracks, deep scratches, bends, loose pieces, or a damaged top. Set the grip aside if you plan to reuse it, and inspect it for splits or a stretched opening before fitting it again.

Small, steady movement gives you more control than a sudden pull. If you need both hands and have to brace the pole hard to make the grip budge, that is a sign to stop rather than add force.

Tools and Protection That Help

A soft cloth can protect the pole from scratches while it rests on a table or bench. Keep the pole supported along its length, rather than gripping one spot hard. The goal is to hold it still, not squeeze or bend it.

A blunt plastic tool may help only when the maker’s directions allow it. It should not have a sharp edge, and it should not be wedged deeply between the grip and pole. If the tool slips, the pole can be scratched and your hand can be hurt.

Some people reach for a knife or screwdriver because the grip seems stuck. Avoid that shortcut. A sharp blade can cut into the grip or pole, and a hard tool can slip suddenly when the glue gives way.

Keep your hands dry and use a steady grip. If you are warming the handle as directed, do not hold it against your skin to judge its temperature. Stop if you cannot handle the grip comfortably or if you are unsure whether the heat is safe for that pole.

What to Avoid While Loosening the Grip

  • Do not yank or twist with force. A hard pull can crack the grip, damage the pole, or make your hand slip.
  • Do not use sharp tools to pry the grip up. A blade or pointed tool can cut you or gouge the pole.
  • Do not apply strong or uncontrolled heat. Heat can harm some pole materials, finishes, and grips. Use warmth only if the maker specifically allows it.
  • Do not clamp the pole tightly or bend it for leverage. The pole should stay supported and straight while you work.
  • Do not pour a cleaner, oil, or other liquid into the gap unless the maker recommends it. A liquid may affect the grip or pole, and it may make the parts slippery to handle.

Warmth is not a universal fix for a glued grip. If the maker does not say it is safe, or if you do not know what the pole is made of, skip heat and ask for advice instead.

When to Stop and Ask a Ski Shop

Stop if the grip will not turn or slide with light hand pressure. A hidden fastener or a different attachment design may be holding it in place. More force will not tell you which one it is, but it can damage the pole or make a tool slip.

Ask a ski shop or the pole maker if you cannot find clear instructions, if the pole has a crack or bend, or if the grip starts to split while you work. Get help before using heat when the maker’s guidance is missing or unclear. A shop can advise whether the grip is removable and how to proceed without guessing.

Stop at once if the pole starts bending, the finish begins to lift, or you hear a cracking sound. Put the pole down and inspect it without pulling further. If you see damage, do not fit a new grip and use the pole as though nothing happened; ask a shop or the maker whether it is safe to use.

Check the Pole and Grip Before Fitting a Replacement

  • Look over the pole. Check the area under the old grip for cracks, deep marks, bends, or loose material. If anything looks damaged, ask a ski shop or the maker before using the pole.
  • Check the grip. Look for splits, a widened opening, or pieces missing from its inside edge. A grip that is cracked or no longer fits snugly may not be suitable to reuse.
  • Confirm that the pole and replacement grip match. Check the replacement maker’s fit guidance rather than assuming any grip will fit. If you are unsure, ask the pole maker or a ski shop to confirm.
  • Follow the fitting instructions. Do not add glue or use heat unless the instructions call for it. The correct fitting method can vary by pole and grip.

You may be able to reuse a grip if it comes off without cracking or stretching and the maker’s directions allow it. Check that it has no damage and fits as the instructions describe. If it feels loose or the pole surface is damaged, do not rely on the old grip to stay in place.

FAQs

How can I tell whether a ski pole grip is glued on?

Look for a screw, pin, or other visible fitting around the grip. If you find none, glue may be holding it, but the attachment is not always obvious from the outside. Check the maker’s instructions before twisting or warming it.

Can I warm a ski pole grip to loosen it?

Only if the pole maker says heat is allowed and explains how to use it. The pole’s material, finish, and grip design can affect what is safe. If the instructions are unclear, do not apply heat.

What should I do if the grip will not budge?

Stop rather than pulling harder or forcing a tool into the gap. Check for a hidden fastener and look for the maker’s removal directions. If you still cannot identify the attachment, ask a ski shop or the pole maker.

Can I reuse the old grip?

Possibly, if the grip comes off without cracking or stretching and the maker allows reuse. Check the opening and the rest of the grip for splits or damage before fitting it again. Follow the fitting instructions so it does not sit loose.

Related guides: how to remove leki ski pole grips and how to change ski pole grips.

5
2 ratings
David Westbrook
WRITTEN BY
David Westbrook
Hi, I'm David! Hailing from Atlanta, I'm an absolute winter and outdoor gear enthusiast. For 15 years, I've been diving into the world of outdoor products, providing hands-on reviews and comprehensive buying guides for everything from snow boots to camping gear.