How to Measure Ski Pole Length With the Elbow Check
At home, a skier turns a pole upside down and wonders where to hold it. Stand in ski boots, grip the pole just below the small disk near its tip, and rest the handle on a level floor; your elbow should bend close to a right angle. That quick check gives a better fit than guessing from height alone.
Ski boots matter because they change how tall you stand compared with regular shoes. Your stance and where you hold the pole can also change the result. For a pole that stays one length, use the check to choose a size; for one you can shorten or lengthen, adjust it until your elbow lands in the same position. If you’re between sizes, compare both with the maker’s size chart and choose the one that feels more comfortable in boots. Here’s how to do the check step by step.
What a Comfortable Ski Pole Fit Feels Like
A well-sized pole lets you hold the grip with your arm relaxed and your elbow bent close to a right angle. The elbow check gives you a useful starting point because it shows how the pole meets your body, rather than guessing from your height alone.
If a pole is too long, you may have to lift your shoulder or reach outward to plant it. If it is too short, you may bend more than feels natural or reach down toward the snow. Either can make planting the pole feel awkward, especially when you repeat the motion while moving.
Your stance affects the result. Stand upright but relaxed, with your arms near your sides. Don’t lock your elbow, shrug your shoulder, or lean toward the pole to make a size seem to fit.
The check is most useful when you wear your ski boots. Boots change your standing height compared with regular shoes, and the pole needs to feel right in the boots you’ll ski in. If you measure without boots, treat the result as a starting point, not a final answer.
How to Measure Ski Pole Length Step by Step
Use a pole, your ski boots, and a flat, level floor. A hallway or garage floor works if you can stand comfortably and keep the pole upright. If you have no pole yet, use the manufacturer’s size chart to narrow down a starting size, then confirm the fit with the actual pole in your boots.
Put on your ski boots and stand upright on the level floor. Keep your feet comfortably apart and your shoulders relaxed. You don’t need to crouch as if you were skiing downhill.
Turn the pole upside down so the grip touches the floor and the basket points up. The basket is the small disk near the bottom of the pole.
Hold the pole just below the basket. Keep your hand close to the basket, rather than gripping the shaft near its middle. This puts your hand at the height it would be near the snow when you hold the pole normally.
Rest the top of the grip on the floor beside you. Keep the pole upright and close to your body. Don’t angle it toward you or away from you, since that changes where your hand sits.
Check the bend in your elbow. Your upper arm should hang comfortably near your side, and your forearm should rise so your elbow bends close to a right angle. Your shoulder should stay down and relaxed.
Look at how the position feels as well as how it looks. Your wrist should not need to bend sharply to hold the pole, and your shoulder should not lift toward your ear. If you have to change your stance or reach to make the elbow look right, reset your feet and repeat the check.
It can help to check both arms, especially if you are holding the pole awkwardly with your less familiar hand. The goal is a relaxed, repeatable position, not a perfect angle measured with a tool. If the pole shifts while you check, place the grip back on the floor and start again.
Use the Fit to Choose a Fixed or Adjustable Pole
A fixed-length pole stays one length, so use the elbow check to compare the available sizes. If a size feels close, check the maker’s sizing chart too. Charts can use height ranges or size names, and the exact options differ by maker and pole.
An adjustable pole can be made longer or shorter. Set it near the length that gives you the relaxed elbow position, then check that the pole is secure according to its instructions. Don’t assume an adjustable pole is set correctly just because its markings match a chart; confirm how it feels in your boots.
Use this short checklist before settling on a size:
Boots: Are you wearing the ski boots you plan to use?
Position: Is the grip on the floor, with your hand just below the basket?
Elbow: Is your arm relaxed, with the elbow bent close to a right angle?
Body: Can you keep your shoulder down and stand naturally?
Chart: Does the maker’s chart support the size you are considering?
If the chart and your fit check point to different sizes, compare the available poles in your boots if you can. A chart is a helpful guide, but the pole should not force you to shrug, reach, or twist your wrist. For an adjustable pole, make a small change and repeat the check rather than changing the length by a large amount at once.
Between Sizes and Common Measuring Mistakes
If you fall between two fixed lengths, try both positions if the poles are available to compare. Choose the one that lets you stand naturally and hold the grip without raising your shoulder or stretching down. If neither feels comfortable, check that you are holding the pole below the basket and standing in your ski boots before deciding.
Your usual stance can also affect what feels comfortable. Someone who stands very upright may prefer a different feel from someone who naturally bends their knees and hips. The elbow check gives you a clear baseline, but a relaxed, comfortable hold matters too. Use the maker’s chart as another guide, especially when the available sizes are far apart.
A few small mistakes can make a good pole seem like the wrong size:
Measuring in regular shoes: Your position may change once you put on ski boots. If you can’t measure in boots, use the chart as a starting point and repeat the check in boots before skiing.
Holding the pole in the wrong place: When the pole is upside down, hold the shaft just below the basket. Holding it much farther down changes the height of your hand and can make the pole seem shorter.
Angling the pole: Keep the grip on a level floor and the pole upright. A slant can shift your hand position and give you a misleading fit.
Changing your posture to fit the pole: Don’t lift your shoulder, lean sideways, or bend your knees more than usual. Stand comfortably and let the pole show whether its length suits you.
Relying only on your height: Height can help you find a starting size on a maker’s chart, but it doesn’t confirm how the pole feels in your boots.
If you can’t tell which size is more comfortable, pause and check the maker’s chart or ask a ski shop to help you compare the poles. There’s no need to force a choice based on a single measurement. The useful result is a pole that lets you hold your arm comfortably and plant the pole without reaching or shrugging.
FAQs
Should I wear ski boots when measuring for poles?
Yes, if you have them. Ski boots change your standing position, so measuring in the boots you’ll ski in gives you a more useful fit check. If you don’t have your boots yet, start with the pole maker’s chart and confirm the size in boots later.
Where should I hold a pole when it’s upside down?
Turn the pole so the grip rests on the floor and the basket points up. Hold the shaft just below the basket, not near the middle of the pole. That hand position makes the elbow check meaningful.
Do adjustable poles need a different measuring method?
No. Use the same upside-down elbow check, then adjust the pole until your arm feels relaxed. Follow the maker’s instructions for setting and securing the pole, and confirm its length in your ski boots.
Related guides: how to measure cross country ski pole length and how to measure skate ski pole length.





















