How to Measure Skate Ski Pole Length for the Right Fit
Stand upright in your skate-ski boots on a flat floor, then measure from the floor to around your mouth or chin. That gives you a useful starting length, but the pole maker’s sizing chart should guide your final choice because sizing methods can differ.
Boots raise your standing height, so measuring in regular shoes may point you to a different size. The chart may also use a specific measuring method, and your comfort and skiing style can affect which length feels right. Use the steps below to take your measurement and check what to do if it falls between sizes.
Where should the measurement start and stop?
Use the floor as your starting point and a spot around your mouth or chin as your first height reference. This gives you a useful estimate, not a final size for every brand or skier. Pole makers can use different measuring methods, so their sizing chart should settle the choice before you buy or cut a pole.
The floor-to-mouth or floor-to-chin measurement is useful because it connects your body height to a pole length you can check at home. It also helps you avoid guessing from an old pair that may be the wrong size, or comparing yourself with someone who has a different build or skiing style.
Mouth height and chin height are close but not identical. Treat them as a starting range rather than two rules that must produce the same number. If one point gives you a result that falls between sizes, use the maker’s chart and consider how the poles feel when you stand naturally in your skate-ski boots.
Before measuring, check what the maker means by pole length. A chart may ask for your height, a measurement from the floor, or a recommended pole size. Follow the chart’s directions as written. Don’t apply a result from one brand’s chart to another brand just because the numbers look similar.
How do you measure at home?
Measure in the footwear and posture you’ll use as the basis for choosing your poles. Skate-ski boots are the best reference if you have them. Ask someone to help hold the tape straight if you can; a second person can make it easier to keep the tape vertical and read the mark without leaning.
Put on your skate-ski boots and stand on a firm, level floor. If you don’t have the boots yet, stand in your regular shoes and note that the result is only an estimate until you check the pole maker’s method.
Stand upright with your feet comfortably apart. Keep your head level and look straight ahead. Don’t stretch your neck or stand on your toes to reach a higher point.
Place the end of a tape measure flat on the floor beside you. Keep it vertical, close to your body, rather than letting it lean away from you.
Read the height at your mouth, then at your chin if it’s easy to do without changing your posture. Write down the measurement and the footwear you wore.
Compare your result with the sizing chart for the exact pole maker and model you’re considering. Use the chart’s instructions if they call for a different reference point or measuring method.
If you’re measuring alone, mark the wall at mouth or chin height, then measure from the floor to the mark. Keep your shoulders relaxed while you mark it. Recheck the mark with a tape measure, since a pencil mark made while reaching can end up too high or too low.
Take the reading more than once if the tape moved or you had to bend. The readings should be close when you keep the same posture and footwear. If they differ noticeably, reset the tape and repeat rather than averaging measurements that may have been taken from different positions.
Should you wear your ski boots?
Yes, use your skate-ski boots when possible. Your boots change how tall you stand compared with regular shoes or bare feet, so measuring in them gives you a closer match to your skiing position. Keep the boots on while you measure, rather than measuring in sneakers and trying to correct the result by guessing.
If you don’t have boots yet, measure in the shoes you have and record that detail beside your result. Then follow the pole maker’s chart, including any instructions about footwear. Don’t add or subtract a guessed amount for boot height. The maker may already account for how its poles are measured or may ask for a different reference.
A sizing chart for a different brand is not a substitute. Makers can set up their charts differently, and the pole length printed or listed for one model may not line up with another maker’s size labels. Check the exact chart for the poles you plan to buy, especially if you are close to a size boundary.
Also check how the maker defines pole length. If the chart explains where to measure on the pole, use that definition when you compare a pole you already own. A number measured from a different point can make two poles seem like different lengths even when the useful part of each is similar.
How do you use the maker’s sizing chart?
Once you have your measurement, use this short checklist before choosing a size:
Find the exact maker and model. Use the chart provided for the poles you’re considering, not a general chart or another brand’s guide.
Read the chart’s directions. Check whether it asks for your height, a floor-to-body measurement, or another measurement. Follow the stated method.
Match the right units. Make sure your measurement and the chart use the same units. Convert the measurement only if needed, and check the conversion before relying on it.
Look for a range or boundary. If your result sits between listed sizes, don’t round automatically. Read the maker’s guidance on choosing between sizes, or contact the maker if the chart doesn’t explain it.
Confirm before cutting. If you’re shortening a pole, check the maker’s instructions first. Cutting is hard to undo, and the maker’s directions can explain where the pole should be measured and whether shortening is suitable for that model.
If the chart gives a pole size from your height rather than your floor measurement, use the height method it asks for. Don’t substitute your mouth-height reading unless the chart says to. The purpose of measuring at home is to give you a useful check, not to override the maker’s sizing instructions.
If you can’t find a chart, ask the maker or seller for the correct sizing guidance for that exact pole. Include your height, the measurement you took, and whether you wore skate-ski boots. That gives them useful details without relying on a size chart meant for a different pole.
What if you fall between sizes?
First, repeat your measurement in skate-ski boots, standing naturally on a level floor. A small difference can come from leaning, a tilted tape, or measuring from a slightly different point. If the result still falls between sizes, use the maker’s guidance rather than choosing a size by its label alone.
Your comfort and technique can help you decide when the chart allows a choice. A pole that feels too short may make you feel as if you’re reaching down more than you want. A pole that feels too long may feel awkward to place and manage. These are cues to consider, not a replacement for the maker’s chart.
Think about how you ski, too. If you already have a pair that feels comfortable and lets you push smoothly, compare its length using the new maker’s measuring instructions. Don’t assume your old poles are the right size if they have always felt awkward or if you don’t know how their length was measured.
When you can’t try a size before buying, prioritize the maker’s chart and ask the maker to explain any unclear boundary. If you can compare sizes in person, hold the poles as you would while skiing and notice whether your arms and shoulders stay relaxed. Avoid choosing a longer or shorter size just because it seems like it should provide more power.
What mistakes can lead to the wrong size?
Measuring in regular shoes and forgetting to tell the chart or seller is an easy mistake. So is leaning your head toward the tape, raising your heels, or measuring to the top of your head instead of the suggested point around your mouth or chin. Each can shift the result away from your ordinary standing position.
Another common mistake is treating every maker’s chart as interchangeable. A chart can use its own instructions, so a size recommendation from one company may not apply to another. Check the exact pole’s chart and the meaning of its listed length before you order or cut anything.
Don’t cut a pole based only on your home measurement. Confirm the correct size and the maker’s instructions first. If a pole already feels wrong, compare it with the chart and check how its length was measured before making any permanent change.
The measurement is a starting point, while the chart and your comfortable skiing position help confirm the choice. If the pole maker’s instructions are unclear, contact the maker or a ski shop for help with that specific pole. That’s especially useful before cutting, since a mistake could leave you with a pole that can’t be restored to its original length.
FAQs
Is chin height always the correct target?
No. Mouth or chin height is a starting reference, and the pole maker may give a different method. Use the chart for the exact pole you’re considering to confirm the size.
Can I measure without owning poles?
Yes. You can measure from the floor to around your mouth or chin and use that result with the maker’s chart. Follow the chart’s own directions if it asks for a different measurement.
Should I use my height instead of a floor measurement?
Use whichever measurement the maker’s chart requests. Your full height and your floor-to-mouth or floor-to-chin measurement are not the same, so don’t enter one in place of the other.
What should I do if the chart doesn’t explain the size boundary?
Ask the maker or seller which size fits your measurement and explain whether you measured in skate-ski boots. Don’t cut a pole or guess between sizes until you have clear guidance for that model.
Related guides: how to measure for ski pole length and how to measure cross country ski pole length.





















